The value of ZUTP1500B is in the exact combination of controls and power it provides. This Enerpac ZUTP Electric Tensioning Pump is built around manual valve control. The 115V electrical configuration is one of the model-level choices that must match the available site power.
ZUTP pumps are selected for hydraulic bolt tensioning, where the required operating pressure is well above standard industrial hydraulic-pump ranges. The hydraulic performance point for this model is 20 in³/min @ 21,750 psi, paired with a 1.7 hp motor. This version uses a manual tensioning valve for hydraulic direction control.
The Practical Difference With ZUTP1500B
Verify site power against the 115V requirement; a nearby suffix may represent a different electrical version.
The adjacent model ZUTP1500E helps clarify the choice. input voltage is 115V on ZUTP1500B versus 230V on ZUTP1500E; that is the key separation between these two otherwise related pumps.
Specifications
| Pump Series | ZUTP Series |
|---|---|
| Power Source | Electric |
| Maximum Operating Pressure | 21,750 psi |
| Rated Oil Flow | 20 in³/min @ 21,750 psi |
| Reservoir Capacity | 1.0 gal |
| Valve Configuration | Manual tensioning valve |
| Valve Operation | Manual |
| Voltage | 115V |
| Phase | Single Phase |