MP350 Enerpac MP Series Multifluid Hand Pump fills the middle ground between low-pressure fluid testing and conventional 10,000 psi hydraulic work. Its 5,000 psi maximum pressure gives users more capability than the MP110 while preserving more second-stage flow than the higher-pressure MP700 and MP1000.
A Practical Mid-Range Multifluid Pump
Enerpac developed the MP Series for environments where ordinary pump materials may not be the best match for the fluid being handled. The anodized aluminum housing, stainless-steel internal pumping parts and nitrile seals support use with several water- and oil-based fluids. Optional EPDM seals extend the range to certain fluids such as Skydrol and brake fluids when correctly specified.
The two-speed design is particularly useful in test and filling applications: the first stage moves fluid quickly until system resistance increases, then the second stage provides the lower displacement needed for controlled pressure generation. An external reservoir is required, allowing the fluid supply to be sized independently of the pump.
For a 5,000 psi system, MP350 avoids choosing a 10,000 or 14,500 psi model simply for capacity that may never be used.
Specifications
| Pump Series | MP Series |
|---|---|
| Power Source | Manual |
| Maximum Operating Pressure | 5,000 psi |
| Pump Speed | Two-Speed |
| Pump Operation | Hand Operated |
| Pump Material | Anodized Aluminum / Stainless Steel |
| Valve Configuration | Manual Release Valve |
| Valve Operation | Manual |
| Cylinder Compatibility | Single-Acting |
| Gauge Included | No |