Enerpac Repair Kits

Genuine Enerpac and Simplex repair, service and spring kits for hydraulic cylinders, pumps, valves, torque wrenches, cutters and workholding equipment. Not sure which kit you need? Send us your model number and we will confirm the kit before it ships.

Find your kit

Enerpac kit numbers usually start with the model of the equipment they fit. The examples below are kits in this collection.

Equipment	Example kits	Where to look
General purpose RC cylinders	RC5, RC10, RC15 and RC25 ton spring kits; stop ring and plunger wear band kits	Hydraulic Cylinder Repair Kits
Hollow plunger and other cylinders	RCH121K1 for RCH121 and RWH121 cylinders; CDF6K; CDM6K	Hydraulic Cylinder Repair Kits
Workholding	CLSG, CLS and ACL kits	Workholding Repair Kits
Air hydraulic boosters	AHB17K for the AHB17 booster	This collection
Valves	VM valve kits	This collection
Hand pumps	P and MP pump kits	Hydraulic Pump Seal Kits for seals only
Torque wrenches	HLP drive plate and side plate kits, drive unit rebuild kits, swivel manifold kits	Torque Wrench Seal Kits for seals only
Cutters	Kits named for the cutter, such as EBE22, ECCE26, EBC20, EBH30, EDCH130 and EWCH180 kits	Puller, Cutter and Press Repair Parts

Kit types

Kit	What it usually covers
Repair kit	The internal parts needed to rebuild a specific model, which can include seals along with other wear parts
Seal kit	Seals and related sealing parts only. See Enerpac Seal Kits.
Service kit	A set of parts for a specific service task on the tool
Spring kit	Return springs. Enerpac's RC-TRIO cylinders use hybrid pre-tensioned return springs that remove without special tools.
Wear band kit	Wear bands for the stop ring or plunger. Enerpac's RC-TRIO bearing system uses up to 4 wear bands for side load resistance.
Hardware, guard and wear plate kits	Fasteners, guards and wear plates for a specific tool

The contents of every kit are listed on the equipment's repair parts sheet. When the kit and the sheet do not match, the production version of your equipment may be different, so call (704) 463-1070 before ordering.

Rebuild tips

Work clean. Enerpac warns that dirt in the system can cause pump, cylinder and valve failure.
Refill with Enerpac oil. See Enerpac Hydraulic Oil.
Test with a gauge. Enerpac's catalog says to always use a gauge when lifting or pressing. See Hydraulic Pressure Gauges.

Hydraulic equipment should be serviced by a qualified hydraulic technician, as Enerpac's instructions state.