Enerpac 8000 Series electric hydraulic pumps are high-flow industrial power units designed for large hydraulic cylinders, multiple-cylinder systems and applications requiring substantially more oil flow than smaller portable electric pumps. These two-speed pumps operate up to 10,000 psi and use a 12.5 hp electric motor with 18 gallons of usable hydraulic oil capacity.
High-Flow Hydraulic Power for Large Cylinder Systems
The 8000 Series delivers 4.4 gal/min at pressures up to 3,700 psi and 2.0 gal/min at 10,000 psi. This combination provides fast cylinder movement at lower pressure while maintaining full 10,000 psi capability when higher force is required.
- Maximum operating pressure: 10,000 psi.
- Oil flow: 4.4 gal/min at 3,700 psi and 2.0 gal/min at 10,000 psi.
- Motor: 12.5 hp electric motor.
- Usable oil capacity: 18 gallons.
- Electrical configurations: 230V and 460V three-phase models.
- Valve options: manual and solenoid configurations for single- and double-acting hydraulic cylinders.
Choosing an Enerpac 8000 Series Pump
Select the pump based primarily on cylinder type, valve control and available electrical power. PEM8218 models use a manual valve for single-acting cylinders, while PEM8418 models use manual 4-way control for double-acting cylinders. PER8418 models provide solenoid-operated 4-way control for double-acting systems.
The 8000 Series is best suited to applications where high oil flow, a large reservoir and heavy-duty electric power are required. For smaller or more portable systems, compare Enerpac ZE Series electric pumps.
To compare additional pump families and power configurations, browse all Enerpac electric hydraulic pumps.
