PEM8418L is an Enerpac 8000-Series Electric Hydraulic Pump configured around double-acting advance / hold / retract operation. Its four-way style of control is appropriate where both directions are hydraulically powered, while the center hold position allows movement to be paused between commands.
A practical comparison is PEM8418. Between the two, valve arrangement is 4-way, 3-position tandem-center locking manual valve on PEM8418L versus 4-way, 3-position manual valve on PEM8418. That gives the buyer a concrete reason to choose one model over the other.
Power input is 230V, three phase, 60 Hz. That requirement should be matched to the facility, generator or jobsite supply. Available oil volume is set by the 18 gal reservoir, so the connected equipment’s oil requirement should be verified before final selection.
Confirm that the connected equipment uses the double-acting circuit this model is configured to control.
For cycle planning, the key output figure is 2.0 gal/min @ 10,000 psi; the motor size is 12.5 hp.
Specifications
| Pump Series | 8000 Series |
|---|---|
| Power Source | Electric |
| Maximum Operating Pressure | 10,000 psi |
| Rated Oil Flow | 2.0 gal/min @ 10,000 psi |
| Reservoir Capacity | 18 gal |
| Valve Model | VM-4L |
| Valve Configuration | 4-way, 3-position tandem-center locking manual valve |
| Valve Operation | Manual |
| Cylinder Compatibility | Double-Acting |
| Voltage | 230V |
| Phase | Three Phase |
| Frequency | 60 Hz |