Within the Enerpac Electric Hydraulic Pump range, ZE3404MB is differentiated by its double-acting advance / hold / retract operation setup. Its four-way style of control is appropriate where both directions are hydraulically powered, while the center hold position allows movement to be paused between commands.
Model selection becomes clearer against ZE3408MB. In that comparison, reservoir capacity is 1.2 gal on ZE3404MB versus 1.8 gal on ZE3408MB.
Before Specifying ZE3404MB
The ZE platform is built around configurable hydraulic control. Manual, solenoid and Venturi-valve options let the same pump family serve different cylinder and operating requirements. The 1.2 gal reservoir determines how much oil is available to the connected hydraulic circuit and should be checked against total cylinder or tool volume. At rated pressure, Enerpac specifies 40 in³/min @ 10,000 psi from the 1 hp motor package.
Check the hydraulic system's total oil demand against the 1.2 gal reservoir before final selection.
Specifications
| Pump Series | ZE Series |
|---|---|
| Power Source | Electric |
| Maximum Operating Pressure | 10,000 psi |
| Rated Oil Flow | 40 in³/min @ 10,000 psi |
| Reservoir Capacity | 1.2 gal |
| Valve Model | VM43 |
| Valve Configuration | 4-way, 3-position manual valve |
| Valve Operation | Manual |
| Cylinder Compatibility | Double-Acting |
| Voltage | 115V |
| Phase | Single Phase |
| Frequency | 50/60 Hz |