The selection case for ZE4408SB starts with LCD-equipped remote control. This Enerpac Electric Hydraulic Pump is one specific hydraulic and electrical arrangement within the broader family. The hold position is useful in a double-acting circuit when the cylinder must be stopped between powered advance and powered return movements.
Model-Level Guidance for ZE4408SB
Enerpac offers the ZE family with multiple valve and control arrangements, so the pump can be matched to both the cylinder type and the way the operator needs to control the circuit. For cycle planning, the key output figure is 60 in³/min @ 10,000 psi; the motor size is 1.5 hp. The pendant moves pump control away from the power unit, which is useful when the operator needs to watch the tool or cylinder. The LCD control package adds pump status and diagnostic information.
Model selection becomes clearer against ZE4410SB. In that comparison, reservoir capacity is 1.8 gal on ZE4408SB versus 2.6 gal on ZE4410SB.
Check the hydraulic system's total oil demand against the 1.8 gal reservoir before final selection.
Specifications
| Pump Series | ZE Series |
|---|---|
| Power Source | Electric |
| Maximum Operating Pressure | 10,000 psi |
| Rated Oil Flow | 60 in³/min @ 10,000 psi |
| Reservoir Capacity | 1.8 gal |
| Valve Model | VE43 |
| Valve Configuration | 4-way, 3-position solenoid valve |
| Valve Operation | Solenoid |
| Cylinder Compatibility | Double-Acting |
| Voltage | 115V |
| Phase | Single Phase |
| Frequency | 50/60 Hz |