Shop Enerpac Porta Power kits and ready-to-use hydraulic cylinder and pump sets for lifting, pushing, positioning, equipment repair, and industrial maintenance. Choose from general-purpose, low-height, and hollow-plunger cylinder configurations with hand, foot, air-powered, and cordless hydraulic pump options.
Enerpac Porta Power sets are available in capacities ranging from compact 5-ton systems through high-capacity 100-ton hydraulic sets. Use the filters on this page to compare load capacity, cylinder type, pump type, and stroke and narrow the selection to the hydraulic set that best fits your application.
Choosing the Right Enerpac Porta Power Kit
The right Porta Power kit starts with the work the hydraulic system needs to perform. Capacity is important, but it should not be the only selection factor. Stroke length, cylinder design, available clearance, pump type, and the operating environment can all affect which set is the best choice.
When comparing Enerpac Porta Power kits, consider:
- Required load capacity
- Cylinder stroke
- Available clearance around the load
- General-purpose, low-height, or hollow-plunger cylinder design
- Hand, foot, air-powered, or cordless pump operation
- Required portability
- Working pressure and hydraulic-system compatibility
Enerpac combines matched cylinders and pumps into complete hydraulic sets so users can select a system based on the required force, movement, access, and method of operation instead of assembling individual components separately.
Enerpac Porta Power Sets by Capacity
Porta Power sets on this page cover a broad range of load capacities, including 5-ton, 10-ton, 12-ton, 15-ton, 20-ton, 25-ton, 30-ton, 50-ton, 60-ton, and 100-ton configurations.
Smaller-capacity sets can provide a more compact and portable solution where space and handling are important. Higher-capacity sets provide greater hydraulic force for heavier lifting, pushing, positioning, and maintenance applications.
Capacity should always be considered together with stroke, cylinder design, available clearance, pump configuration, and the requirements of the complete hydraulic system. Use the Load Capacity and Cylinder Stroke filters to compare available configurations.
General-Purpose, Low-Height and Hollow-Plunger Porta Power Sets
Enerpac Porta Power systems are available with several cylinder designs, allowing the hydraulic set to be matched more closely to the available space and the type of work being performed.
General-Purpose Cylinder and Pump Sets
SCR Series Porta Power sets combine general-purpose hydraulic cylinders with matched pump configurations. These sets are designed for broad lifting, pushing, positioning, maintenance, and repair applications where a specialized cylinder profile is not required.
You can also browse Enerpac general-purpose hydraulic cylinders separately when replacing or selecting a cylinder outside of a complete Porta Power set.
Low-Height Cylinder and Pump Sets
Low-height Porta Power sets are designed for applications where available clearance is limited. Their shorter collapsed cylinder profile allows the hydraulic cylinder to be positioned in spaces where a conventional general-purpose cylinder may not fit.
Enerpac SCL Series sets are available in multiple capacities and pump configurations. For additional restricted-clearance cylinder options, browse Enerpac low-height hydraulic cylinders.
Hollow-Plunger Cylinder and Pump Sets
Hollow-plunger Porta Power sets use cylinders with a center-hole design that allows rods, cables, threaded components, or similar workpieces to pass through the cylinder. This expands their usefulness for applications requiring pushing, pulling, tensioning, or positioning around a central component.
Enerpac SCH Series sets combine hollow-plunger cylinders with compatible hydraulic pumps. Browse additional Enerpac hollow-plunger hydraulic cylinders when you need to compare cylinders separately from complete sets.
Choose a Porta Power Kit by Pump Type
The pump determines how hydraulic pressure is generated and how the operator powers the system. Enerpac Porta Power configurations include hand, foot, air-powered, and cordless pump options.
Hand Pump Porta Power Sets
Hand-operated hydraulic pumps provide a portable, self-contained solution that does not require compressed air, electricity, or battery power. They are well suited to field service, equipment repair, maintenance, and applications where simple manual hydraulic control is preferred.
Foot Pump Porta Power Sets
Foot-operated pump configurations allow the operator to generate hydraulic pressure while keeping both hands available for positioning or other aspects of the work. Foot-pump configurations are available with several cylinder styles and capacities.
Air-Powered Porta Power Sets
Air-powered hydraulic pumps use a compressed-air supply to generate hydraulic pressure. They can reduce the manual effort required for applications involving repeated operation or where shop air is already available.
For pumps sold separately, browse Enerpac air hydraulic pumps.
Cordless Porta Power Sets
Cordless hydraulic pump sets provide powered operation without requiring an electrical cord or compressed-air connection. They can be useful for field service and mobile applications where access to external power is limited.
Browse Enerpac battery-powered hydraulic pumps for additional cordless pump options.
What Comes in an Enerpac Porta Power Kit?
Enerpac cylinder-and-pump sets are designed as matched hydraulic systems. Enerpac's SC-Series documentation specifies ready-to-use sets that include a single-acting hydraulic cylinder, two-speed pump, 6-foot safety hose, calibrated gauge, and gauge adaptor.
Toolbox configurations package selected hydraulic components together for easier storage, transport, and field use. Because exact components can vary by model and toolbox configuration, always review the individual product specifications before ordering.
How to Compare Porta Power Kits
The fastest way to narrow the 66 Enerpac Porta Power configurations on this page is to use the product filters and compare the specifications that directly affect the application.
Load Capacity: Select a hydraulic set with sufficient rated capacity for the application. Never exceed the manufacturer's rated capacity.
Cylinder Stroke: Stroke determines how far the cylinder plunger can extend. A higher-capacity cylinder is not automatically the better choice if it does not provide the required movement.
Cylinder Type: General-purpose cylinders provide broad versatility. Low-height cylinders are designed for restricted-clearance applications, while hollow-plunger cylinders provide a center opening for specialized pushing and pulling configurations.
Pump Type: Hand pumps maximize portability, foot pumps provide foot-operated control, air pumps use compressed air, and cordless pumps provide battery-powered hydraulic operation.
Available Clearance: Consider both stroke and collapsed cylinder height when working under equipment or inside restricted spaces. A cylinder must physically fit into position before it can perform the required work.
Hydraulic Hoses, Pumps and Related Components
If you are building or servicing a hydraulic system rather than purchasing a complete Porta Power set, BuyEnerpac.com also carries Enerpac hydraulic pumps, cylinders, couplers, gauges, and other hydraulic components.
For replacement or additional hose, browse 10,000 PSI hydraulic hoses. Always verify the pressure rating, connection type, and compatibility of every component before connecting or modifying a hydraulic system.
Enerpac Porta Power FAQs
What is an Enerpac Porta Power kit?
An Enerpac Porta Power kit is a matched hydraulic cylinder and pump set designed to provide portable hydraulic force for applications such as lifting, pushing, positioning, equipment repair, and industrial maintenance.
What size Porta Power kit do I need?
The correct size depends on the complete application, not just the load weight. Consider required capacity, stroke, available clearance, cylinder design, pump type, and the operating requirements of the hydraulic system. Never exceed the rated capacity of the equipment.
What is the difference between a general-purpose and low-height Porta Power set?
A general-purpose set is designed for a broad range of hydraulic lifting and pushing applications. A low-height set uses a cylinder with a shorter collapsed profile, making it better suited to applications where there is limited space between the cylinder and the load.
What is a hollow-plunger Porta Power set used for?
A hollow-plunger cylinder has an opening through the center of the cylinder and plunger assembly. This allows rods, cables, threaded components, or similar items to pass through the cylinder in applications where a solid-plunger design would not be suitable.
Are 20-ton, 30-ton, 50-ton and 100-ton Porta Power kits available?
Yes. Enerpac Porta Power sets are available in a wide range of capacities, including 20-ton, 30-ton, 50-ton, and 100-ton configurations, along with several lower and intermediate capacities. Available cylinder type, stroke, and pump configuration vary by model.
Should I choose a hand, foot, air-powered or cordless Porta Power kit?
Choose the pump type based on how and where the hydraulic system will be used. Hand pumps provide simple portable operation without an external power source. Foot pumps allow foot-operated control. Air pumps are useful where compressed air is available, while cordless pumps provide battery-powered operation for mobile and field applications.
Do Enerpac Porta Power sets include a hose and gauge?
Enerpac's SC-Series cylinder-and-pump sets are specified as ready-to-use systems that include a single-acting cylinder, two-speed pump, 6-foot safety hose, calibrated gauge, and gauge adaptor. Review the individual product listing for the exact components supplied with specialized toolbox configurations.
Can I use a different pump, hose or cylinder with my Porta Power system?
Hydraulic components should only be combined when their pressure ratings, connections, capacities, pump characteristics, and other operating specifications are compatible. Verify the specifications of every component before assembling or modifying the hydraulic system.
