The Enerpac PTW3000 is a PTW-Series pneumatic square-drive torque wrench designed for applications that require speed, control, and repeatable bolting with compressed-air power. It operates across a verified torque range of 900 to 3,000 ft-lb (1,220 to 4,067 Nm) through a 1 in square drive.
Key Specifications
- Series: PTW-Series
- Wrench configuration: Square drive
- Torque range: 900-3,000 ft-lb (1,220-4,067 Nm)
- Square drive: 1 in
- Free speed: 3.1 RPM
- Tool weight: 23 lb, excluding reaction arm
- Power source: Compressed air
Air Supply Requirements
Enerpac specifies an air source regulated or limited to 120 psi (8.3 bar) maximum and capable of supplying at least 50 CFM (85 m³/h) at 100 psi (6.9 bar). Torque is set by adjusting air pressure according to the calibration certificate supplied for the wrench.
Package Configuration
This non-C model is supplied without the FRL and the 10-ft hose used between the FRL and wrench. Enerpac specifies the same torque wrench model with a C suffix when the FRL and hose package is required.
Application Selection
Select an impact-quality socket that matches the 1 in square drive and verify that the required torque falls within the 900-3,000 ft-lb operating range. Position the reaction arm against a suitable reaction point before applying torque.
Specifications
| Power Source | Air |
|---|---|
| Air Pressure Range | Up to 120 psi |
| Air Consumption | 50 CFM minimum at 100 psi |