If LCD-equipped remote control is the defining requirement, ZE3404SB is the Enerpac Electric Hydraulic Pump version to evaluate. Because this model carries LCD control, it offers a different operator interface from the classic/non-LCD variants in the same family.
Available oil volume is set by the 1.2 gal reservoir, so the connected equipment’s oil requirement should be verified before final selection.
Enerpac offers the ZE family with multiple valve and control arrangements, so the pump can be matched to both the cylinder type and the way the operator needs to control the circuit. Hydraulic direction comes from a 4-way, 3-position solenoid valve, matched to double-acting service and advance / hold / retract operation. Its motor package is configured for 115V, single phase, 50/60 Hz, which is often the deciding factor between closely related model numbers.
Compare this model with ZE3408SB if the choices look similar. reservoir capacity is 1.2 gal on ZE3404SB versus 1.8 gal on ZE3408SB. That distinction is more important than the shared series name when matching the pump to the system.
Confirm that the connected equipment uses the double-acting circuit this model is configured to control.
Specifications
| Pump Series | ZE Series |
|---|---|
| Power Source | Electric |
| Maximum Operating Pressure | 10,000 psi |
| Rated Oil Flow | 40 in³/min @ 10,000 psi |
| Reservoir Capacity | 1.2 gal |
| Valve Model | VE43 |
| Valve Configuration | 4-way, 3-position solenoid valve |
| Valve Operation | Solenoid |
| Cylinder Compatibility | Double-Acting |
| Voltage | 115V |
| Phase | Single Phase |
| Frequency | 50/60 Hz |