Enerpac ZE2 Series electric hydraulic pumps provide hydraulic power for compatible cylinders and industrial tools. The models in this collection have a maximum operating pressure of 10,000 psi and an 8 L reservoir with approximately 1.8 gallons of usable oil capacity. Choose by cylinder type, valve function, electrical supply and how you need to control the pump.
Choose the Right ZE2 Pump
Start with the equipment the pump will operate. A single-acting cylinder and a double-acting cylinder require different hydraulic control. Then check the oil volume needed for the full stroke, the available electrical supply and the valve functions required to advance, hold and retract the load.
Match the Valve to the Hydraulic Circuit
- 3-way valves: Available on ZE2 configurations for compatible single-acting applications. Compare the exact valve's positions and functions before selecting a model.
- 4-way, 3-position valves: Available for compatible double-acting applications requiring powered flow in both directions.
- Manual or electric valve operation: Select the control arrangement that fits how the equipment will be operated. A pendant may control the motor, the valve or both, depending on the configuration.
Compare Motor Voltage and Pump Speed
ZE2 models in this collection include 115V and 230V configurations. Check the voltage of the specific product against the power available at your facility or jobsite. Both single-stage and two-stage models are available. Two-stage pumps provide higher flow at lower pressure before shifting to their high-pressure stage; compare the model's flow performance when cylinder speed or cycle time matters.
Check Usable Oil Capacity
The ZE2 pumps listed here have an 8 L reservoir and approximately 1.8 gallons of usable oil capacity. Check the total oil required by the connected cylinder or tool, hoses and other components. Reservoir size alone does not establish whether a pump has enough usable oil for the application.
Shop Enerpac ZE2 Electric Hydraulic Pumps
Compare the ZE2 models below by voltage, valve configuration, operating method and factory options. For higher-flow ZE3 through ZE6 models, browse Enerpac ZE Series electric hydraulic pumps. To compare other electric pump families, visit Enerpac electric hydraulic pumps.
Specifications and selection guidance are for general reference. Confirm the exact pump, valve, cylinder, hose and electrical requirements against current Enerpac documentation before ordering or use.
