The Enerpac CSM2131 is a single-acting, spring-return manifold cylinder from the CSM series. It screws into a standard SAE #6 (9/16"-18 UN) port cavity machined in your fixture, so oil is fed through the fixture body with no external tubing. It delivers 380 lb at 5,000 psi over a 0.51 in stroke.
Features
- Installs in a standard SAE port cavity for a clean, tube-free fixture
- Center-tapped plunger (#6-32 UN) for contact buttons and attachments
- Spring return
- Very compact for multi-cylinder fixtures
Sizing
Effective area is 0.08 in² and a full stroke uses 0.04 in³ of oil. Overall length is 1.71 in retracted and 2.22 in extended; weight 0.3 lb. Workholding circuits often run below 5,000 psi; at 2,000 psi this cylinder gives about 160 lb of force and at 3,000 psi about 240 lb.
How it compares
Same SAE #6 cavity, different stroke: CSM271 (0.28 in).
Before you order: Check the installation dimensions for the SAE #6 (9/16"-18 UN) cavity in the Enerpac catalog before machining; the spring needs at least 580 psi to overcome.
Related models
| Model | Force | Stroke | Cavity |
|---|---|---|---|
| CSM271 | 380 lb | 0.28 in | SAE #6 |
| CSM571 | 1,190 lb | 0.28 in | SAE #10 |
| CSM5131 | 1,190 lb | 0.51 in | SAE #10 |
| CSM1071 | 2,590 lb | 0.28 in | SAE #12 |
| CSM10131 | 2,590 lb | 0.51 in | SAE #12 |
| CSM10191 | 2,590 lb | 0.75 in | SAE #12 |
| CSM18131 | 3,900 lb | 0.51 in | SAE #16 |
| CSM18251 | 3,900 lb | 0.98 in | SAE #16 |
Specifications
| Product Family | Hydraulic Workholding Cylinders |
|---|---|
| Series | CSM |
| Cylinder Type | Block & Manifold Hydraulic Cylinders |
| Stroke | 0.51 in |
| Push Force | 380 lb |
| Cylinder Stroke | 0.51 in |
| Maximum Operating Pressure | 5,000 psi |
| Cylinder Action | Single Acting |
| Return Type | Spring Return |
| Capacity Range | Up to 5 Ton |
| Weight | 0.3 lb |