The Enerpac PTW2000C is a PTW-Series pneumatic square-drive torque wrench designed for applications that require speed, control, and repeatable bolting with compressed-air power. It operates across a verified torque range of 500 to 2,000 ft-lb (678 to 2,712 Nm) through a 1 in square drive.
Key Specifications
- Series: PTW-Series
- Wrench configuration: Square drive
- Torque range: 500-2,000 ft-lb (678-2,712 Nm)
- Square drive: 1 in
- Free speed: 8 RPM
- Tool weight: 19.5 lb, excluding reaction arm
- Power source: Compressed air
Air Supply Requirements
Enerpac specifies an air source regulated or limited to 120 psi (8.3 bar) maximum and capable of supplying at least 50 CFM (85 m³/h) at 100 psi (6.9 bar). Torque is set by adjusting air pressure according to the calibration certificate supplied for the wrench.
Included With This C-Suffix Model
- PTW-Series pneumatic torque wrench
- Standard reaction arm
- FRL120C filter-regulator-lubricator
- 10-ft (3 m), 1/2-in air hose connecting the FRL to the wrench
- Calibration certificate
The air hose from the shop air supply to the FRL is not included. Use a separate 1/2-in air-supply hose capable of supporting the required airflow.
Application Selection
Select an impact-quality socket that matches the 1 in square drive and verify that the required torque falls within the 500-2,000 ft-lb operating range. Position the reaction arm against a suitable reaction point before applying torque.
Specifications
| Power Source | Air |
|---|---|
| Air Pressure Range | Up to 120 psi |
| Air Consumption | 50 CFM minimum at 100 psi |