ZE5208TG-QHMR Enerpac Electric Torque Wrench Pump, VE42TQM, LCD, 1.75 gal, 230V 3-Phase, Coupler, Heat Exchanger, 4-Wrench Manifold, Roll Cage

The Enerpac ZE5208TG-QHMR is a ZE5T-Series electric torque wrench pump for driving Enerpac S-, W- and RSL-Series hydraulic torque wrenches at up to 10,000 psi. It uses a 24 VDC solenoid torque wrench valve with a pendant, LCD electrics and a pressure transducer, and is built for 208–240V three-phase power. It comes factory-fitted with a 10,000 psi coupler for S-, W- and RSL-Series wrenches, a heat exchanger, a 4-wrench manifold and a roll cage. The 4-wrench manifold lets the pump run up to four wrenches at once.

Sizing

The ZE5T is a two-stage pump: about 850 in³/min at 100 psi and 825 in³/min at 700 psi to run the wrench up quickly, then 120 in³/min at 10,000 psi under full load. The 3.0 hp motor drives a relief valve adjustable from 1,000 to 11,600 psi. The 1.75 gal reservoir holds about 404 in³ of usable oil. Flow figures are at 60 Hz; on 50 Hz power expect about 5/6 of these values.

Before you order: Confirm the wrench series (S, W or RSL) and the torque required before ordering hoses and sockets; confirm a 208–240V three-phase supply at the point of use.

Related configurations