The Enerpac WPFL100V is a Collet-Lok swing clamp: the plunger swings 90° counterclockwise onto the part, clamps, and a collet then mechanically locks the 2,000 lb clamping force. Because the lock is mechanical, the fixture can be depressurized or disconnected after clamping and the part stays held, an extra level of safety for pallet and fixture work.
Features
- Double-acting Collet-Lok action for fully automated operation
- Live hydraulics not required to maintain clamping force
- Lower flange mounting
- Viton seals standard
- Uses clamp arm CA-1050 (sold separately)
Sizing
Clamp stroke is 0.47 in within a total stroke of 1.11 in. Effective area is 0.50 in² clamping and 1.11 in² unclamping; oil required is 0.55 in³ to clamp and 1.22 in³ to unclamp. Maximum oil flow is 305 in³/min. Length is 7.67 in retracted and 8.77 in extended.
Before you order: Collet-Lok needs at least 1,400 psi and separate valves for the clamp/unclamp and lock/unlock functions; follow Enerpac's Collet-Lok sequence. Keep oil flow at or below 305 in³/min. For a non-rotating version, Enerpac replaces the L with N in the model number.
Related models
| Model | Force | Mounting | Swing |
|---|---|---|---|
| WPFL300V | 8,500 lb | Lower flange | Left |
| WPTL100V | 2,000 lb | Threaded body | Left |
| WPTR100V | 2,000 lb | Threaded body | Right |
| WPTL300V | 8,500 lb | Threaded body | Left |
| WPFC210V | 5,000 lb | Lower flange | Push (no swing) |
| WPTC110V | 2,500 lb | Threaded body | Push (no swing) |
| WPTC210V | 5,000 lb | Threaded body | Push (no swing) |
Specifications
| Product Family | Hydraulic Workholding Cylinders |
|---|---|
| Series | WPFL |
| Cylinder Type | Hydraulic Swing Clamp Cylinders |
| Clamp Force | 2,000 lb |
| Cylinder Stroke | 1.11 in |
| Maximum Operating Pressure | 5,000 psi |
| Cylinder Action | Double Acting |
| Return Type | Hydraulic Return |
| Capacity Range | Up to 5 Ton |